octon Posted October 31, 2019 Share Posted October 31, 2019 Hi, It would be useful to be able to select options for Avoid on route for segments of the planned route. For example, now we just have the option to avoid Toll roads on the entire route, or have toll roads for the complete route. I would like to have the possibility to avoid toll roads on certain segments of the route, and not on other. This is more useful with electric cars than with standard vehicles, as it may have quite an impact on power consumption and then time to charge. I have an example where it is better to avoid toll roads but one in terms of driving time, so with my ICE vehicle I always took the toll road as it was convenient and permit to gain about 20 minutes. I made some estimation with ABRP selecting only the segment with toll road without avoiding it and avoiding it, and the result showed that taking the toll road if there is headwind means adding... 20 minutes on charger. Then result is that if there is headwind, it is preferable to avoid toll road, but if there is no wind or tailwind, it is better to take the toll road on this segment. For the complete trip on this exemple, the result of the simulation between option avoiding toll roads and not avoid toll roads, make 2 completely different plannings (then I have to create lot of segments to get the road I would like to take). Link to comment Share on other sites More sharing options...
Woka Posted January 11, 2021 Share Posted January 11, 2021 +1 Link to comment Share on other sites More sharing options...