Jump to content
polestar22

Planned destination SoC far too low

Recommended Posts

I am fairly new to ABRP in planning real trips. Car is a polestar 2, using premium account in the cars ABRP App which runs on Android Automotive Platform in the car itself. I turned on Live Data, which read data from the car, i.e. SoC and Reference Consumption.

It turned out that after planning a trip the remaining SoC at destination is pretty wrong compared to what the Soc is after having arrived. For exapmple, at start of the trip it showed 16% for destination. Then, during the ride it permanently improves, and after arrival, actual SoC was 30%

My question ist, why does this happen?

Settings are:
Live-data on, with premium account.
SoC at Destination: 15%
Speed Reference: 105%
Max. speed: 130km/h
Use real traffic data
Batterie degradation: 1%
Use real weather data

The problem ist, that ABRP might set a charging stop, although at the and it would not have been necessary.

Link to comment
Share on other sites

18 hours ago, polestar22 said:

I am fairly new to ABRP in planning real trips. Car is a polestar 2, using premium account in the cars ABRP App which runs on Android Automotive Platform in the car itself. I turned on Live Data, which read data from the car, i.e. SoC and Reference Consumption.

It turned out that after planning a trip the remaining SoC at destination is pretty wrong compared to what the Soc is after having arrived. For exapmple, at start of the trip it showed 16% for destination. Then, during the ride it permanently improves, and after arrival, actual SoC was 30%

My question ist, why does this happen?

Settings are:
Live-data on, with premium account.
SoC at Destination: 15%
Speed Reference: 105%
Max. speed: 130km/h
Use real traffic data
Batterie degradation: 1%
Use real weather data

The problem ist, that ABRP might set a charging stop, although at the and it would not have been necessary.

Hi @polestar22,

I've checked the calibrated reference consumption value for your car and though 199 wh/km may be on the lower side it certainly wouldn't cause the inaccuracy you describe. I would instead assume that the live SoC value somehow have been inactivated for planning in your settings.

Should the issues persist you may submit an official report over at: https://abrp.upvoty.com/boards/posts/report-a-bug/

/Katya

Link to comment
Share on other sites

Hi @Katya-ABRP

thanks for your reply. Yes, I know, pretty low Reference Consumption, but this ist, what the car shows as well in the car computer display.

So, I will have a closer look on the Live-Setting and will make sure that this ist definitely set on. Otherwise I'll report this again, the way you mentioned.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×
×
  • Create New...