Roadrunner74 Posted April 17, 2022 Share Posted April 17, 2022 I bought a vLinker MC+ reader, plugged it into my id.4 and can get info from the Infocar app. I'm running ABRP 4.2.3. There is nothing in the iOS settings app nor is there anything in the ABRP app (that I can find) refering to OBD2 setup. What am I missing? Link to comment Share on other sites More sharing options...
0 Samuel-ABRP Posted April 18, 2022 Share Posted April 18, 2022 You have to add a car and then click on the icon behind it. Link to comment Share on other sites More sharing options...
0 Bonzo Posted April 24, 2022 Share Posted April 24, 2022 On 4/18/2022 at 5:28 AM, Samuel-ABRP said: You have to add a car and then click on the icon behind it. I got the same verbatim response from ABRP Admins when I emailed them this same question. The canned answer is rather confusing, as I already have my car added, and nowhere can I find that gear icon. A bit more detailed reply would be appreciated. Link to comment Share on other sites More sharing options...
0 Rickj2903 Posted April 25, 2022 Share Posted April 25, 2022 (edited) Go into the app, click on settings (ABRP logo top left) under "planned settings" click "Car Model" click the gear icon then scroll down the screen to "Settings" ABRP OBD connection should be an option to link (its a while since I did mine so not sure if that's correct) hope this helps Edited April 25, 2022 by Rickj2903 Link to comment Share on other sites More sharing options...
I bought a vLinker MC+ reader, plugged it into my id.4 and can get info from the Infocar app.
I'm running ABRP 4.2.3. There is nothing in the iOS settings app nor is there anything in the ABRP app (that I can find) refering to OBD2 setup.
What am I missing?
Link to comment
Share on other sites