jdchi Posted December 17, 2018 Share Posted December 17, 2018 Anyone else having issues with waypoint charging? If I use the charging options to set (i) the power and time or (ii) the power and charge to percentage, I get the message "Planner Error" and no route is generated. If I instead set the time and the charge to percentage, I get a route calculated but with no charging at that waypoint. Here is an example of where I've set the time and percentage, and I get a route with no charging at the waypoint: https://abetterrouteplanner.com/?plan_uuid=325fdacf-45ff-4873-b29b-83b2a3a13353 Link to comment Share on other sites More sharing options...
Bo-ABRP Posted December 17, 2018 Share Posted December 17, 2018 3 hours ago, jdchi said: Anyone else having issues with waypoint charging? If I use the charging options to set (i) the power and time or (ii) the power and charge to percentage, I get the message "Planner Error" and no route is generated. If I instead set the time and the charge to percentage, I get a route calculated but with no charging at that waypoint. Here is an example of where I've set the time and percentage, and I get a route with no charging at the waypoint: https://abetterrouteplanner.com/?plan_uuid=325fdacf-45ff-4873-b29b-83b2a3a13353 Thanks for the report! There was a bug which made waypoint charging return an error, just as you pointed out. However, for the other example with only time and percentage, this is actually not supported. You need to provide power (unless the waypoint is a known charger) and time or final SoC. This is not completely obvious from the user interface Edit: Here is your route as I think you intended it: https://abetterrouteplanner.com/?plan_uuid=9e4a21e0-2fc9-471d-8802-c8791c4098b0 Link to comment Share on other sites More sharing options...
jdchi Posted December 17, 2018 Author Share Posted December 17, 2018 Thanks--and thanks for such a great tool! Link to comment Share on other sites More sharing options...