Samuel-ABRP Posted July 24, 2022 Share Posted July 24, 2022 Veepeak is not one of our recommended devices. Too many people have issues with that. Link to comment Share on other sites More sharing options...
Ou Boet Posted July 25, 2022 Share Posted July 25, 2022 I've got an OBDLink CX that I use with my 28kWh 2018 IONIQ. It workers perfectly. I know the device costs a bit more, but it's very well built and performs well. It's worth the extra IMO. Link to comment Share on other sites More sharing options...
oxman55 Posted September 3, 2022 Share Posted September 3, 2022 Niro Link to comment Share on other sites More sharing options...
dudule Posted December 28, 2022 Share Posted December 28, 2022 The OBDLink CX offers a huge number of parameters to be selected (with the OBDLink Software....Do you have some recommendations to assure its cfunction as reliable as possible with the ABRP ??? regards gerd Link to comment Share on other sites More sharing options...
NMEV6 Posted January 11 Share Posted January 11 I have a Kia EV6 and an OBDLink CX. I can’t get the dongle to show up in the available devices list to connect. What am I doing wrong? There is a list of like 5 seemly abstract names and when I select on of those it is a no go. I was expecting to see the OBDLink CX showing up, but it is not. Any help please? Link to comment Share on other sites More sharing options...
Bob I. Posted April 12 Share Posted April 12 On 1/11/2023 at 4:17 PM, NMEV6 said: I have a Kia EV6 and an OBDLink CX. I can’t get the dongle to show up in the available devices list to connect. What am I doing wrong? There is a list of like 5 seemly abstract names and when I select on of those it is a no go. I was expecting to see the OBDLink CX showing up, but it is not. Any help please? I am having the same issue with the same OBDLink CX dongle. I get many obscurely named devices none of which are recognizeable. My car is a BMW i4 M50. Link to comment Share on other sites More sharing options...
Bob I. Posted April 12 Share Posted April 12 23 minutes ago, Bob I. said: I am having the same issue with the same OBDLink CX dongle. I get many obscurely named devices none of which are recognizeable. My car is a BMW i4 M50. Let me correct my post directly above. I have the OBDLink MX+ and can get it to show up when I try to connect to live data. I only get a bunch of obscurely named devices. Link to comment Share on other sites More sharing options...
peter.skotte Posted April 28 Share Posted April 28 On 4/12/2023 at 4:00 PM, Bob I. said: I am having the same issue with the same OBDLink CX dongle. I get many obscurely named devices none of which are recognizeable. My car is a BMW i4 M50. I just got my OBDLink CX and I have the same problem: the list of BT devices all have non-recognizable names/numbers. however in the general BT list in iPhone the OBDLink CX shows just fine. doesn’t ANYONE from ABRP have ideas for a solution? Link to comment Share on other sites More sharing options...
peter.skotte Posted April 29 Share Posted April 29 14 hours ago, peter.skotte said: I just got my OBDLink CX and I have the same problem: the list of BT devices all have non-recognizable names/numbers. however in the general BT list in iPhone the OBDLink CX shows just fine. doesn’t ANYONE from ABRP have ideas for a solution? I Think I have found the issue? yesterday when I set everything up, the main OBDLink app isolated the Bluetooth connection to itself. So today I just went straight into ABRP and searched for the OBDLink CX. And voila, there is was. hope this helps others in the same situation? 2 Link to comment Share on other sites More sharing options...
MattJ Posted May 25 Share Posted May 25 Hmm.. after VW ID.4 3.2 version update EVNotify got broken. Consumption data is way out of line and I presume you get this data incorrectly too even with BLE. Is this fixed in your OBD BLE interface or do you still use the same calculation as before and incoming data would also be incorrect? Since I can't use OBD BLE yet this is a current issue for me since ABRP doesn't support Bluetooth classic. Link to comment Share on other sites More sharing options...
GarryG Posted June 25 Share Posted June 25 I just tried to connect to my BT ELM327 adapter ... connection to my phone is just fine, used it on my Volvo, as well as my Camaro, with Torque Pro, but ABRP will not display the BT entry when scanning for it ... what am I doing wrong? Link to comment Share on other sites More sharing options...
cuins Posted June 26 Share Posted June 26 Hi. i have Skywell Et5. Chineese electric vehicle. in germany my car has diffeent brand it sold with Elaris beo name. I want to connect abrp app with my car with obd2 and i want to plan my range with my live consumtion. but i want to ask 3 question. 1- How can i found my cars obd socket? i dont know where is it? 2- Which obd device is fully compatible with my car? 3- For live consumption am i need abrp premium? when i enter to add new car or edit my car settings i didnt see abrp link abrp obd connection choice. there is only link generic. Thanks for your help. Link to comment Share on other sites More sharing options...
regis bataille Posted July 2 Share Posted July 2 Bonjour, mêmes soucis avec Vlinker mc+ et ma MG4. NE voit pas la version android. Link to comment Share on other sites More sharing options...
