Gwoity Posted December 25, 2021 Share Posted December 25, 2021 I have always run TorquePro to get live data to my Bolt EV and it has worked fine. I wanted to try the new ABRP direct OBD2 Integration, but seem to be having some issues. It has worked once, but now has a hard time seeing my Veepeak OBD2 reader. I have unlinked my TorquePro and but my OBD2 reader doesn't show up in the list when I try the direct connect and it doesn't seem to connect automatically when I start the app. Any ideas? Link to comment Share on other sites More sharing options...
denischti59 Posted December 30, 2021 Share Posted December 30, 2021 On 12/25/2021 at 2:16 PM, Gwoity said: I have always run TorquePro to get live data to my Bolt EV and it has worked fine. I wanted to try the new ABRP direct OBD2 Integration, but seem to be having some issues. It has worked once, but now has a hard time seeing my Veepeak OBD2 reader. I have unlinked my TorquePro and but my OBD2 reader doesn't show up in the list when I try the direct connect and it doesn't seem to connect automatically when I start the app. Any ideas? On my side, ABRP don't detect my veepeak when I want to add it! Works fine with EVnotify 1 Link to comment Share on other sites More sharing options...
Samuel-ABRP Posted December 30, 2021 Share Posted December 30, 2021 This only works with BLE OBD Dongles. Link to comment Share on other sites More sharing options...
Gwoity Posted December 31, 2021 Author Share Posted December 31, 2021 23 hours ago, Samuel-ABRP said: This only works with BLE OBD Dongles. This is mine... A Veepeak BLE OBD2 reader 1 Link to comment Share on other sites More sharing options...
Samuel-ABRP Posted December 31, 2021 Share Posted December 31, 2021 We are currently working on improving the support of new OBD devices without releasing a new ABRP version each time. I also saw that dongle on our new issue tracker already, so we will deal with it soon. Link to comment Share on other sites More sharing options...
Gwoity Posted December 31, 2021 Author Share Posted December 31, 2021 1 minute ago, Samuel-ABRP said: We are currently working on improving the support of new OBD devices without releasing a new ABRP version each time. I also saw that dongle on our new issue tracker already, so we will deal with it soon. Great! Looking forward to it... Link to comment Share on other sites More sharing options...
mixduptransistor Posted January 2, 2022 Share Posted January 2, 2022 On 12/30/2021 at 11:37 AM, Samuel-ABRP said: This only works with BLE OBD Dongles. Will this always only support BLE adapters or will full Bluetooth adapters eventually be supported? For example I have an OBDLinkMX+, not the CX, but if the MX+ is on the roadmap I won't bother buying a different one Link to comment Share on other sites More sharing options...
Samuel-ABRP Posted January 2, 2022 Share Posted January 2, 2022 Eventually we will also support classic BT, but we have no timeline on that yet, as there are workarounds (other apps) available for that. 1 Link to comment Share on other sites More sharing options...
Neutronbomb Posted January 6, 2022 Share Posted January 6, 2022 On 1/2/2022 at 1:52 AM, Samuel-ABRP said: Eventually we will also support classic BT, but we have no timeline on that yet, as there are workarounds (other apps) available for that. I have the same Veepeak BLE device but I don't even see the option in my app to try and add a device. What version of the app (android) do I need to be on? I even joined the beta program. Link to comment Share on other sites More sharing options...
Gwoity Posted January 6, 2022 Author Share Posted January 6, 2022 (edited) 6 minutes ago, Neutronbomb said: I have the same Veepeak BLE device but I don't even see the option in my app to try and add a device. What version of the app (android) do I need to be on? I even joined the beta program. I'm on the beta and the option is under settings... Show Live Data Instructions Link ABRP OBD2 connection. It does seem to get data from my OBD2 now, maybe the last update helped? Edited January 6, 2022 by Gwoity Link to comment Share on other sites More sharing options...
Samuel-ABRP Posted January 6, 2022 Share Posted January 6, 2022 Only supported cars will show that option. Beta is not required. Link to comment Share on other sites More sharing options...
Gwoity Posted January 6, 2022 Author Share Posted January 6, 2022 Just now, Samuel-ABRP said: Only supported cars will show that option. Beta is not required. Has the Veepeak OBD2 reader been updated in the ABRP software? It seems to be picked up now when I start my car by ABRP now without me starting my TorquePro app? Link to comment Share on other sites More sharing options...
Samuel-ABRP Posted January 6, 2022 Share Posted January 6, 2022 We only use connections to automatically connect to if you previously finished the setup process. So if you did not set it up with ABRP before successfully, we don't establish a connection to it. Link to comment Share on other sites More sharing options...
Gwoity Posted January 6, 2022 Author Share Posted January 6, 2022 (edited) 3 minutes ago, Samuel-ABRP said: We only use connections to automatically connect to when you previously finished the setup process. So if you did not set it up with ABRP before, i don't think that we establish a connection to it of there was none before. I was able to get it connected previously, but when I went back it wouldn't show up in the device list regularly. I guess it is still linked, because I do get data. Edited January 6, 2022 by Gwoity Link to comment Share on other sites More sharing options...
Samuel-ABRP Posted January 6, 2022 Share Posted January 6, 2022 Yes if it is linked once we always connect again. It doesn't show up if you use it with another app before I think which might still reserve the connection. Link to comment Share on other sites More sharing options...
Gwoity Posted January 6, 2022 Author Share Posted January 6, 2022 4 minutes ago, Samuel-ABRP said: Yes if it is linked once we always connect again. It doesn't show up if you use it with another app before I think which might still reserve the connection. Great! I don't know if it's me, but the few routes I have used it for when linked directly seem much more accurate than when I used it with TorquePro, maybe it was still learning my consumption patterns? Link to comment Share on other sites More sharing options...
Oreg1965 Posted January 22, 2022 Share Posted January 22, 2022 Should the ABRP app on an Android phone detect the vLinker FD+ BLE OBD2 adapter? I tried to connect, but it can't find the adapter. Link to comment Share on other sites More sharing options...
Gwoity Posted January 22, 2022 Author Share Posted January 22, 2022 4 hours ago, Oreg1965 said: Should the ABRP app on an Android phone detect the vLinker FD+ BLE OBD2 adapter? I tried to connect, but it can't find the adapter. I had issues with my Veepeak BLE adapter showing up. Is your adapter connected to any other app? I just kept trying and eventually it appeared and I was able to link it. Link to comment Share on other sites More sharing options...
gohz Posted January 23, 2022 Share Posted January 23, 2022 Does the option to connect a OBD adapter show up on ABRP standard or do I have to upgrade to the PREMIUM version? Could not find the option on my standard ABRP app on Android.... If yes, do I need a separate subscription für each of the three drivers? If yes this would be rather expensive for just one car.... All drivers have their own Android smartphones with their own google account. Of course it would be possible to share the ABRP account. Link to comment Share on other sites More sharing options...
Womble62 Posted January 23, 2022 Share Posted January 23, 2022 On 1/6/2022 at 8:11 PM, Samuel-ABRP said: Only supported cars will show that option. Beta is not required. Is the Ioniq 5 a supported car? I have an OBDlink MX+ through Kyebriq that I’m trying to connect. Do I need premium? Link to comment Share on other sites More sharing options...
Samuel-ABRP Posted January 23, 2022 Share Posted January 23, 2022 Yes Ioniq 5 is supported. Live data is available in free version of ABRP and does not require premium. You just need to add a car and then in the car settings you will see the different telemetry options, like our OBD connection. Link to comment Share on other sites More sharing options...
Simon Carruthers Posted January 25, 2022 Share Posted January 25, 2022 I have a Kia EV6 and an OBDLink MX+ i can’t get the dongle to show up in the available devices list to connect. Is there something I have to do to get the app (iOS) to see this type of dongle? Link to comment Share on other sites More sharing options...
Ou Boet Posted January 25, 2022 Share Posted January 25, 2022 I have the OBDLink MX+ device. It's Bluetooth, but it's not BLE. That means it's not compatible. The dongle has to be BLE compatible to work directly with ABRP. Link to comment Share on other sites More sharing options...
DBR Posted May 19, 2022 Share Posted May 19, 2022 I have a kia ev6 and a veepeak ble II but it not werking yet white abrp (online white evnotify). Link to comment Share on other sites More sharing options...
Andrei Posted June 2, 2022 Share Posted June 2, 2022 I also try to use Veepeak BLE (just bought a new one) with ABRP, but without success. The connection stays, but the tranferred data is not proper, the SoC is not provided. The vehicle is Kia EV6. Any suggestions? Maybe I should use an other OBD-adapter? Which one? Link to comment Share on other sites More sharing options...