green light Posted October 1, 2021 Share Posted October 1, 2021 While charging during an ABRP configured route, ABRP should (does) show the charge mode display with all this "remaining time", "charge rate" and so on. But right now it showed this screen when charge rate was below 50kW. Or in other words while charge rate was above 50kW it shows the normal driving screen telling me that the desitnation can't be reached with current SOC. But suddenly, when charge rate went down to 47kW the charge mode display is shown with a clean charge curve and remaining time. But the 20 minutes before with 64kW were not shown. It there some maximum charge check, so a Leaf is not allowed to charge faster? But the E+ does. Link to comment Share on other sites More sharing options...
