MysticMetal Posted July 25, 2021 Share Posted July 25, 2021 Description: Resetting reference consumption doesn't do anything Type: Yes, latest on Android and iOS AFAIK. Replication Steps: Get the reference consumption for a car to some non-default value (400+ on a model Y in my case) Go into settings for the car and click reset reference consumption Check reference consumption, see it didn't change. For bonus points, try unlinking and re linking to reset and see it not change Link to comment Share on other sites More sharing options...
Sofia-ABRP Posted July 30, 2021 Share Posted July 30, 2021 Hi @MysticMetal, Do you find that the reference consumption of your vehicle is not reset at all, or that it changes back after a while? In Settings (detailed) > Reference consumption you can toggle the use of live calibrated reference consumption. See the screenshot below to see what it looks like when the reference consumption is static. (White background, blue car icon, value is editable.) If the value is static you can enter a custom value. The default ref. cons. of the Model Y Long Range AWD is 3,35 mi/kWh @ 65 mph (or 298 wh/mi @ 65 mph, please note the units). /Sofia Link to comment Share on other sites More sharing options...
MysticMetal Posted July 30, 2021 Author Share Posted July 30, 2021 Hello Sofia, I knew about that trick. I figured out later that the issue was only a display one... I wanted to reset the live calibrated reference consumption (it was 400+ due to driving with a bag on top of my car) and did what I thought would reset it, but it wasn't changed in the display until after I drove for a while, which I wasn't expecting. I was expecting it to change to the non-live amount immediately without needing to drive at all. ~MysticMetal Link to comment Share on other sites More sharing options...
Sofia-ABRP Posted August 11, 2021 Share Posted August 11, 2021 Hi @MysticMetal, Thank you for clarifying! A trick that might help you avoid this issue in the future is to create a configuration for your car with the extra weight. Go to your car's settings and add a new configuration. Select the option which best suits the nature of the configuration, for instance "Cargo on roof". In the settings of the car while the configuration is selected you can write how much extra weight you are carrying. While this configuration is selected the app will track the consumption of the vehicle with the extra weight etc. When you switch back to the default configuration the app will also switch back to the regular reference consumption. /Sofia Link to comment Share on other sites More sharing options...
MysticMetal Posted August 11, 2021 Author Share Posted August 11, 2021 I saw that option. I'll use it next time. Is there a way to change historical trips to use a different configuration? In case I forget to select it beforehand... Link to comment Share on other sites More sharing options...
Katya-ABRP Posted August 24, 2021 Share Posted August 24, 2021 Hi @MysticMetal, We have previously, as you noted actually not performed the reset until the car was active (driving) again. This is of course both unnecessary an unresponsive. We've therefore just recently changed it so that the reset will be instant, without the requirement to drive. Regarding your question, by 'historical trips' do you mean saved plans? /Katya Link to comment Share on other sites More sharing options...
MysticMetal Posted August 24, 2021 Author Share Posted August 24, 2021 Hi Katya, Just prior trips, not saved or anything. I might know I went to x city and had a trailer and want to change it after I'm done. ~Tom Link to comment Share on other sites More sharing options...
Katya-ABRP Posted August 26, 2021 Share Posted August 26, 2021 Hi @MysticMetal, Okay got it! Currently this is not possible for users to do, however it's a good point. I've had this noted and we'll look into what we can do! /Katya 1 Link to comment Share on other sites More sharing options...
