Calibrated reference consumption

[prgrmr]

My ABRP is connected to Tronity and to Mi3. How is the reference consumption calculated? Some time ago there was a problem with the data on the BMW servers, so my consumption was completely wrong. I clicked Reset consumption, but I still see 96 Wh/km (it should be more around 180 Wh/km). I can not reset it.

And I always see that ABRP is connected to Mi3. Is it also connected to Tronity or only to Mi3?

Thank you.

[Katya-ABRP]

Hi @prgrmr,

I checked the logged drives and we're clearly not getting enough data to properly calibrate the reference consumption value. Something's obviously not as it should be.

Do you mean that you linked the very same saved vehicle first with Tronity and then with mi3?
(It is only intended that one connection is used per saved vehicle.)

What OBD device are you using to connect with mi3?

/Katya

[prgrmr]

I am using Vgate iCar Pro Bluetooth and it is working perfectly. I see the data in Mi3 and also ABRP shows the correct current SoC when I am driving.

And I thought that both sources can be connected at the same time, since they are not providing the same data for my i3, according to this: Live Data Comparison - A Better Routeplanner.

[Katya-ABRP]

Then supposedly there is something preventing ABRP from getting data properly. What does your setup look like other than that? Are you using your iOS device only for both ABRP and Mi3?

Combining different live data sources that complement each other would be nice but it isn't supported at the moment.

/Katya

[prgrmr]

ABRP and Mi3 are running on my phone, I sometimes use it also for calls or playing podcasts. But as I said, the SoC is being updated live with no problems. Does this mean that only some data are transferred between the apps, not all that are necessary?

[prgrmr]

Another question... When I reset the consumption, it stays on 96 Wh/km. Why doesn't it change to the default value for my i3? Before using Mi3, it used to be 179 Wh/km, if I remember correctly.