Best Option for Live Data

[Strife1817]

I noticed the other day that the Torque Pro integration is broken. The website that was configured for the incremental upload, now has a placeholder. As if the website was not paid for.

 

I pay for ABRP Premium, and I rely on the Live Data capability. I have also tried EVnotify, also without luck. The app pulls my ODB2 data, but the Live data integration seems to be broken. 

Is autopi working correctly with the Bolt, or, is it also broken?

[Katya-ABRP]

Hi @Strife1817,

Which website are you referring to?

Your car appears to no longer have a linking option selected, could you try doing the setup again? You can do so by going into: Settings (detailed) > Car model, then clicking the cogwheel to the right of your saved car and re-selecting the linking option.

From what we can see none of these connection types with the Chevy Bolt should be 'broken'.

/Katya

[Ken G]

Mine is still working.  That said, the Battery Capacity is a bit overstated. Based on the number it is using the Battery Capacity Raw (Ah) rather than the estimated kWh.

[Strife1817]

Well, let's see. In the past week I have tried using Torque Pro and EVNotify. Neither one is updating ABRP. I reconfigured everything last night, to test it on my way to work. It seemed to be OK, up until I stopped driving, and turned off the car for a stop.

When I got back in my car, to finish the drive, ABRP said that the SOC was 90%. Mind you, ABRP was originally stating that I would arrive at work with 58% left.

[edwinth]

Hello All,

I am driving a ampera-e(Bolt) and recently I bought a ovms kit (https://www.openvehicles.com/) 
Installed the ABRP plugin and this works(most of the time) https://docs.openvehicles.com/en/latest/plugin/abrp/README.html
Sometimes the datafeed stops and I have to stop and start it again.
There is no vehicle template for the bolt/amperae in ovms but the volt/ampera vehicle template worked almost.
I have edited some of the formula values to make it match my ampera-e.

I have started working on vehicle support for the bolt/ampere but have not make much progress as I am not a developer and struggling with coding in c#.
But at least I'm trying :-) https://github.com/Edwintenhaaf/Open-Vehicle-Monitoring-System-3/tree/bolt-amperae-support

If interested I can share my edited volt/ampera template settings.
things that -almost- work:

soc (few % drop when car is off)
No updates on soc when the car is off and charging. Only at full charge/charge stops
SOH does not work
Amps/voltage normal charge works (Fast charge not detected or shown)
Total charged kwh does not reset after charge (could be the current battery issue workaround, charge limit at 94%)
power kwh (does not work)
Battery / Ambient temperature works.
GPS settings works

Thanks,

Edwin

 

 

[edwinth]

On 5/7/2021 at 7:59 PM, Strife1817 said:

Well, let's see. In the past week I have tried using Torque Pro and EVNotify. Neither one is updating ABRP. I reconfigured everything last night, to test it on my way to work. It seemed to be OK, up until I stopped driving, and turned off the car for a stop.

When I got back in my car, to finish the drive, ABRP said that the SOC was 90%. Mind you, ABRP was originally stating that I would arrive at work with 58% left.

try /send at the end of the webserver url and not /torque, that worked for me.

[Strife1817]

Replacing the end of the URL with /send caused the website to complain that it had an unauthorized key. 1

If I append the new key to the end, it gives me this error. 2

[Austin]

So what's the best option? AutoPi has the largest feature set according to the table, but from what little I can understand from their site indicates that it's very expensive.

[Burns Fisher]

You may have to contact EVNotify and have them reset the ABRP token.  That worked for me.  In other words, I had to unlink from EVNotify, then ask them to clear (or reset) the token (maybe not the right term) and then I was able to re-connect and it worked.