Charging times not optimal

[Gleb]

Description: I've set a plan with intremediate stops at chargers.

Now with the plan that ABRP built, at the second charger it says to charge up to 93% even though it knows that my car tapers after 80% when charging at 50kW,

and it doesn't need that much charge as it arrives at the next charger with 45%

Type: webpage

Link to Plan: https://abetterrouteplanner.com/?plan_uuid=4ca96782-31d2-4f46-98cb-0fabb3408258

Replication Steps:

[BarryH]

@GlebYour route starts from "current location", so If i use the link I get a different plan.

However, If I look in the requested route at settings, i see that for this charge stop there is a manual input that 50kWh needs to be charged:

 

[Gleb]

hi @BarryH, thanks for looking into it

here's the same plan from fixed starting point

https://abetterrouteplanner.com/?plan_uuid=d4b8b034-1a06-4bd8-a321-e7aace7bf46b

I was not entering the power of charging, looks like it gets added automatically when I add charger as a waypoint,

anyway it shouldn't make any difference as the power is same as charger's output.

Edited December 9, 2020 by Gleb

[Gleb]

I'm not sure, but it seems that selecting the route does not affect the link, here's the route that Is in question:

 

[BarryH]

@Katya (ABRP)Can you see anything specific in the data of this charger?