Abu Dhabi Dude Posted February 21, 2020 Share Posted February 21, 2020 Description: I would like you to add a possibility to input a wind direction rather than a head or tailwind as it is currently Use Case: Trips are often not in a straight line meaning that at times a headwind will exist, then a crosswind, then a tailwind. An example of this can be seen in the screenshot below of a trip I have made several times. I make many other trips which head East for 100 miles before turning north and so on. Also, if planning a return trip then there is no way of including the wind (other than planning two trips which will often result in an arrival SOC on the outward journey which is too low to reach a charger on the return leg). It would be very helpful if we could input a wind direction and speed and the system then factored it in correctly. Link to comment Share on other sites More sharing options...
Abu Dhabi Dude Posted February 21, 2020 Author Share Posted February 21, 2020 PS Ignore all the charging stops in the above screenshot! I was just plotting every charger on the trip to see where they were. The important thing is the shape of the route to demonstrate the issue. Link to comment Share on other sites More sharing options...