Search the Community

Hi I have crawled through github and a few forums and has found a few changes I think should be made to what is sent to the server. Link to my github where the csv files can be found updated with all the pids I have found from different resources: Link to Krolow's Github These files are needed for Torque to have the right pids to sent to ABRP: 002, 003, 004, 005, 006 and ABRP For ease of use I have also made a combined only the necessary pids into a single file file that has all of these for new installers: ABRP_Only Updated: 000_HV_Charging, To correctly flag if charging or not without the workaround used before Updated: !_ABRP_Fast_Charging, Changed back to refer to value of 000_HV_Charging since it's now working correctly again When Torque sends the log this sensor has pid: ec3d7f Added: 003_VMCU Real Vehicle Speed, to show the actual real speed, should be same as GPS speed Added: !_ABRP_VMCU Real Vehicle Speed, We now have a known pid for this and I saw that for Ioniq this is monitored. Would make the GPS speed no longer needed. When Torque sends the log this sensor has pid: ee4ea0 Added: !_ABRP_Cumulative Energy Charged, We have a known pid for this and I saw that for Ioniq this is monitored. When Torque sends the log this sensor has pid: e38077 Added: !_ABRP_Cumulative Energy Discharged, We have a known pid for this and I saw that for Ioniq this is monitored. When Torque sends the log this sensor has pid: e22958 Added: !_ABRP_Battery Temperature, We have a known pid for this and I saw that it is monitored on other cars. When Torque sends the log this sensor has pid: e90ea2 (Seems ABRP already understands this one since i can see it in the app) Any thoughts on my changes and why some/all of them should or should not be used are much appreciated